Subscribe
list
AMSOIL Synthetic Gear Lubes
Helpful Differential Recommendations:
-
Flush (drain) as much of the old fluid out.
-
Differential fluid capacity depends on ring gear and axle housing size.
-
Do not over/under fill differential. This could mean a capacity difference of a quart or more and may cause over heating problems. (See the owner's manual for proper fill level)
-
AMSOIL gear oils are formulated with friction modifiers for limited slip differential applications. There is no need to add limited slip or additional additives.
-
After changing the differential fluid, drive the vehicle in 7 or 8 figure eight turns, so new lubricant can work its way into the axle assembly
AMSOIL Severe Gear Lubes are formulated with superior "film strength" and extra additives to protect gears and and bearings from scoring and wear, and they effectively resist high heat and possess excellent cold flow properties. Severe Gear Lubes outperform all conventional gear oils and are recommended for all types of vehicles such as turbo diesel pick-ups, SUVs, autos, trucks, heavy equipment and motor homes. Compatible with most limited-slip differentials.
AMSOIL Synthetic 80W-90 Gear Lube
AMSOIL Synthetic 80W-90 Gear Lube is a high quality replacement for applications specifying SAE 80W-90 conventional gear lube. Its synthetic construction and high quality additives provide improved cold flow properties, high viscosity index, heat resistance, excellent wear protection and long equipment life.
AMSOIL SAE 80W-90 Synthetic Lower Unit Gear Lube protects outboard and sterndrive lower units in freshwater and saltwater applications. It is an extreme pressure lubricant engineered specifically to meet the high temperature/high load demands of today's geared equipment. AMSOIL SAE 80W-90 Synthetic Gear Lube (GL-4) doesn't break down in extreme heat and form damaging deposits, varnish and sludge. It maintains its protective capability even in high temperatures, preventing the ridging, rippling and spalling caused by surface distress.
AMSOIL Synthetic Gear Lubes deliver maximum power and fully protect hard-working drivetrains. Synthetics, of course, deliver maximum power because of their molecular structure best reduces friction, a big power-eater. And they protect best, even in temperatures that gel or fry conventional lubes. That's critical given the incredible drivetrain heat generated by heavy-load operations and the temperature extremes in which diesels often work.
In fact, AMSOIL gear lubes provide easy, dependable cold-temperature shiftability in a fraction of the time required by conventional fluids. They actually knock high lube temperatures down to optimal - and outlast ordinary gear lubes.
AMSOIL synthetic gear lubes keep dfferentials and EP gear-lube equipped transmissions running clean, protected and at top-efficiency.
Load-bearing and extreme pressure protection - AMSOIL synthetic gear lubes are formulated to protect gears operating in heavily loaded conditions whether or not the gears operate with full film lubrication. Superior film strength and viscosity retention offer superior protection in full film regimes, while top-quality extreme pressure agents protect when a full lubricating film does not separate gear surfaces.
The thermal durability of AMSOIL synthetic gear lubes ensures extreme pressure protection after extended exposure to extreme temperatures. The extreme pressure agents in conventional gear lubes sometimes lose their effectiveness after extended exposure to high temperatures, leaving gears vulnerable to metal-to-metal contact and wear.
Friction-reduction - AMSOIL synthetic gear lubes reduce friction effectively, which reduces power losses, which reduces excessive gear temperatures by up to 50°F and increases fuel economy. In fact, an independent research institute found that trucks with AMSOIL Series 2000 Synthetic 75W-90 Gear Lube in differentials obtained up to 4.83 percent more miles per gallon than matched trucks with a conventional gear lube in the differentials.
High and low temperature performance - AMSOIL synthetic gear lubes maintain their viscosity better with changes in temperature than conventional lubles do, which allows them to protect over a broader temperature range. They maintain better low temperature fluidity than conventional gear lubes do, while also protecting better in higher temperatures.
Reduce wear - The outstanding extreme pressure and anti-wear properties of AMSOIL Synthetic Gear Lubes keep wear at an absolute minimum. The results: greater equipment realiability and less money spent of repairs, replacement parts, and costly downtime. AMSOIL helps keep equipment in the field or on the road and out of the shop!
Extended drains - In commercial vehicles operated in normal conditions, AMSOIL synthetic gear lubes may be used up to five times longer than conventional petroleum gear lubes may be used.
More - AMSOIL synthetic gear lubes provide limitied slip capability, and may be used in limited slip differentials without special additives. AMSOIL synthetic gear lubes also provide outstanding protection against rust, which is important for stored equipment.
Search
Welcome to my AMSOIL dealer website. If you are looking for a good synthetic motor oil AMSOIL is the motor oil for you. AMSOIL is made in the USA and is the best synthetic motor oil period! Give your investments the best protection possible by using AMSOIL lubricants and filters. Please feel free to contact me if you have any questions or if I can help in anyway. Thank you for visiting.
