Provides superior protection and performance in the most severe automotive driving conditions. AMSOIL High Performance Synthetic 10W-40 Motor Oil provides a wide range of protection in all four-cycle gasoline and diesel engines, including pickups, RVs, cars and off-highway vehicles. It is recommended for use in vehicles subject to stop-and-go driving, short trips, high temperatures, frequent trailer pulling and off-road use.

AMSOIL Series 3000 Synthetic 5W-30 Heavy-Duty Diesel Oil is a premium quality all fleet lubricant, specifically designed for use in commercial, industrial and fleet applications requiring diesel specifications CF, CF-2, CG-4, and CH-4 and API SH, SJ gasoline engine lubrication requirements. Fuel efficient formula for both gasoline and diesel fleets. Delivers up to 82 percent greater wear protection than other popular diesel oils. Series 3000 resists oil breakdown from heat, blow-by chemicals and oxygen up to ten times longer than conventional oils.

The premium choice for API CJ-4 emission quality diesel oil required by model year 2007 and newer diesel engines. It delivers extraordinary lubrication in diesel engines found in commercial, fleet and personal vehicles. Built with the latest additive and synthetic base oil technology, AMSOIL Synthetic 5W-40 Diesel Oil exceeds the higher performance demands of modern engines. It withstands the stress of heat, soot and acids to help prevent deposits, corrosion and wear. AMSOIL Synthetic 5W-40, with its broad viscosity range, is ideal for winter and summer use. It resists breakdown and can extend drain intervals when monitored by oil analysis.

The premium choice diesel oil for model-year 2007 and newer heavy-duty and pickup truck diesel engines requiring API CJ-4 emission-quality oil standards. Delivers extraordinary lubrication in diesel engines in commercial, fleet and personal applications. Exceeds modern specs for emission-quality diesel oil.

AMSOIL Synthetic Heavy-Duty Diesel and Marine Motor Oil combines the superior lubricity and performance capabilities of a premium synthetic lubricant with special rust and corrosion inhibitors. AMSOIL Synthetic Heavy-Duty Diesel and Marine Motor Oil is recommended for engines used in marine applications, as well as diesel engines used in trucks, fleets, mining, earth moving, construction and farm equipment. Other applications include taxi and local delivery fleets with gasoline or diesel engines. With its extended drain intervals, AMSOIL Synthetic Heavy-Duty Diesel and Marine Motor Oil reduces maintenance costs, downtime and the cost of waste oil disposal.

Provide excellent filtering efficiency and high levels of contaminant capacity for heavy-duty on- and off-road gasoline and diesel applications. They provide extended service intervals that coincide with the maximum drain interval recommendations of AMSOIL synthetic motor oils (not to exceed one year)

Made with premium advanced synthetic media technology that results in fibers that have a controlled size, shape & smaller fiber diameter. Deliver both higher dirt holding capacity at the same pressure differential and higher efficiency compared to conventional cellulose filters.

Combines Full-Flow and By-Pass filtration on a single, easy-to-install mount. All installation parts except filter spin-on adapter are included. Must purchase the spin on adapter that matches the filter thread on your vehicle. Without filter elements - 2 required. For use with EaBP90, EaBP100 or EaBP110 Element.

ncreased engine emissions control and tighter tolerances within the engine require high efficiency filters. Donaldson P-Series filters are constructed with full synthetic or synthetic blend media for high efficiency.

A single sampling analysis is useful in providing information when critical failure conditions exist. However, trend analysis is a better tool for estimating the useful life or overall condition of your engine or equipment. Trend analysis samples are taken and analyzed at regularly scheduled intervals. Comparing the most recent analysis to previous reports on a given machine shows the development of trends. Monitoring these trends enables early detection of internal abnormalities. Tested values falling within acceptable limits may show a pattern of subtle variance, which could signal a developing problem.

AMSOIL oil change reminder decals help you keep track of when you changed your oil and how many miles you have on your oil.

Superior dirt containment and air flow make AMSOIL foam air filters the best choice for wear control and performance, especially off-road. Convenient and cost-effective, AMSOIL air filters are reusable. The AMSOIL Air Filter promotes superior engine performance and protection.  In fact, the AMSOIL Air Filter has been proven to allow 30 percent more air flow than conventional paper air filters.  The AMSOIL Air Filter features two layers of oil-wetted foam wrapped around an expanded metal body. Air flows freely through the filter, ensuring optimal combustion for top engine performance.

Oil filters from MANN-FILTER purify oil of dirt and solid particles such as dust, abraded metal, carbon deposits and soot particles. The filter housing is pressure-resistant, protected against corrosion and features a long-life elastomer seal.

Made with a full metal base plate for superior strength at the double seal & also feature a silicone anti-drainback valve. Glass-enhanced media in WIX oil filters offers greater efficiency, capturing more 10 to 12 micron sized particles than other cellulose/synthetic blend medias.

Semi-Fluid 00 Synthetic EP Grease (GSF) AMSOIL Semi-Fluid 00 Synthetic EP Grease is a lithium complex semifluid grease (NLGI 00) formulated with high-viscosity ISO-460 synthetic base oils. Coupled with a sophisticated additive package, AMSOIL Semi-Fluid 00 Synthetic EP Grease coats and reacts to metal surfaces, providing an unparalleled protection system that reduces wear and prevents damage.

Reduces friction and wear in high-speed, high-temperature components like bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #0 is preferred for cold temperature and automatic pump systems.

Reduces friction and wear in high-speed, high-temperature components like wheel bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #1 grease has better mobility and is preferred for cold temperature and automatic pump systems.

Delivers excellent wear protection and extreme-pressure performance over extended service intervals in medium- and heavy-duty applications. Combines select base oils, proprietary synthetic polymeric chemistry, an advanced additive package and a lithium-complex thickener for excellent impact resistance, reliable contaminant control and maximum longevity.

AMSOIL GL Series multi-purpose, EP greases are qualified against the highest grease standards*, NLGI GC (wheel bearing) and LB (chassis), and are designed for multiple use applications. These greases are composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GL Greases are compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

AMSOIL GL Series multipurpose, EP grease is qualified against the highest grease standards*, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple use applications. This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GL Grease is compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

* Applicable only to NLGI Consistency Grades #1 and #2

Delivers excellent wear protection and extreme-pressure performance over extended service intervals in medium- and heavy-duty applications. Combines select base oils, proprietary synthetic polymeric chemistry, an advanced additive package and a lithium-complex thickener for excellent impact resistance, reliable contaminant control and maximum longevity.

AMSOIL Synthetic Water Resistant Lithium Complex Grease is an extreme-pressure multi-purpose grease formulated specially for wet-duty performance. Its water washout and spray off resistance ideally suit it for use in the wheel bearings of vehicles and trailers frequently exposed to water, mud, snow or ice. The grease is also excellent for use in plants, such as paper mills, in which machinery undergoes frequent or prolonged exposure to water.

AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.

Ideal for both fuel injected and carbureted systems. Dissolves and removes fuel system deposits and other contaminants for improved power and overall performance in gasoline engines. Reduces PCV and EGR system deposits. Reduces exhaust emissions (tests show up to 90 percent reduction). Improves engine idle, response and starting.  An initial clean-up dose of six ounces for ten gallons of gasoline restores up to 95 percent of an injector's original fuel flow. Periodic maintenance doses of one ounce for ten gallons of gasoline keep injectors and other fuel system components clean.

A heavy duty spray lubricant fortified with special rust and corrosion inhibitors. Penetrates and adheres to metal surfaces, leaving a long lasting protective coating. Apply MPHD to any metal surface that requires a heavy duty lubricant or is exposed to the damaging effects of salt, moisture or chemical corrosion. Works as an undercoat, leaving a wax-like film. Recommended for motorcycle and bicycle chains. Won't "sling" off. Dry to the touch. Doesn't attract dust. It is ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating car doors, wheel wells, rocker panels, seams and other metal surfaces exposed to water, dirt or road salt.

Improves the performance of all two-cycle and four-cycle gasoline-fueled engines. Just one treatment significantly increases engine response and power. AMSOIL Octane Boost reduces engine knock, improves ignition, helps fuel burn cleaner and inhibits corrosion. Recommended for all high performance off-road and racing applications. Increases octane number by up to 7 points.

Engineered for both gasoline and diesel engines and automatic transmissions. Helps improve operating efficiency, increase fuel economy and reduce emissions.

Formulated with propietary tiered surfactant technology, providing quick and effective heat transfer inside radiator and cylinder heads, which results in reduced operating temperatures, more efficient operation, increased horsepower and significantly reduced engine warm-up times in cold weather.

Increases a fuel's cetane number and improves its ignition quality. Cetane Boost encourages timely, uniform fuel ignition, discourages high pressure rate rise during the combustion cycle and solves startability and driveability problems associated with low cetane number diesel fuels.  Too long an ignition delay at high engine loads leads to an excessively rapid increase in pressure within the cylinder before combustion, which in turn, leads to diesel knock, or rough operation, especially on cold starts.  Excessive pressure rise rates are theoretically cuased by extra chemical reactions occurring before combustion.  The products formed by the extra reactions burn rapidly. Rapid burning causes excessively rapid pressure rise in the cyclinder. With a shorter ignition delay, the extra reactions don't have a chance to occur, hence the rate of pressure rise is reduced.

For diesel fuel is designed for use in Ultra Low Sulfur Diesel fuel (ULSD) and conventional fuels. It functions by modifying wax crystal formation at low temperatures to depress the pour point and improve cold flow filtration properties. AMSOIL Cold Flow Improver contains jet fuel-type deicer to help prevent ice formation in fuels contaminated with water. It is recommended for use with all diesel engines and is compatible with diesel exhaust particulate filters (DPFs). AMSOIL Cold Flow Improver is recommended for use in #2 diesel fuel, #1 diesel fuel, kerosene, heating oil and bio diesel. Add AMSOIL Cold Flow Improver to diesel fuel above the fuel cloud point, which is the temperature wax crystals begin to form. Diesel fuel cloud point varies greatly with some lesser-quality diesel fuels forming wax as warm as 40° F (4°C). AMSOIL recommends treating diesel fuel at a minimum of 32°F (0°C), insuring the fuel is properly treated inmost every case. AMSOIL Cold Flow Improver is designed to control wax crystal formation. It does not reverse wax or gel once formed.

Provides maximum diesel operating efficiency. It compensates for the variances in quality of different fuels (including biodiesel) and the deficiencies of today’s Ultra Low Sulfur Diesel fuel (ULSD) for better engine operation. New engine technology, tighter tolerances and emission regulations require high-quality diesel fuel for long-term engine operability. AMSOIL Diesel Concentrate meets the low sulfur mandate. It improves diesel fuel quality to exceed today’s stringent performance requirements. AMSOIL Diesel Concentrate extends equipment life, lowers operating costs and improves diesel performance.

AMSOIL combines the benefits of biodegradability, low toxicity and all-climate protection. AMSOIL Propylene Glycol Antifreeze and Engine Coolant is safer for kids and pets than ethylene glycol coolants, which are sweet tasting and extremely toxic.  This product is universal in application and is ideal for use in both gas and diesel power autos, RV's, and heavy-duty trucks of all size.  AMSOIL Propylene Glycol Antifreeze and Engine Coolant is completely compatible with EG coolants.  Improved protection against liner pitting and resistance to corrosion of aluminum, iron surfaces and solder points.

Perfect for use on surfaces which may be damaged by conventional lubricants such as grease or oil. Protects with a dry lubricating film. Helps prevent the cracking and drying of rubber. Displaces water and makes an excellent mold release lubricant. May be used where light duty or silicone lubricants are recommended.

A synthetic, greaseless all-purpose lubricant that provides metal surfaces with a long-lasting film. It forms no gum or sludge. Its penetrating agents cut through rust and corrosion to allow free movement of hardware parts. Dries electrical and ignition systems, and protects all electrical equipment from moisture, including salt water. Effective in applications as diverse as hardware, household appliances, sporting goods and electrical equipment. No silicone or harmful chemicals.

AMSOIL Synthetic Automatic Transmission Fluid exceeds the performance requirements for domestic and foreign automatic transmission fluid applications. AMSOIL ATF provides automatic transmissions, power steering units and hydraulic equipment with excellent lubricating protection and better performance over a wider temperature range than do conventional petroleum fluids. Improves fuel efficiency, reduces transmission temperatures and increases transmission life. Provides unsurpassed thermal stability and up to five times the service life of conventional ATFs. Delivers maximum protection for towing and other severe-duty applications.

Formulated for heavy-duty powershift transmissions. Provides outstanding friction performance for enhanced clutch engagement. Prevents slippage and glazing. Shear stable and anti-wear fortified. Resists high-temperature oxidation, varnish & sludge formation. Superb cold-flow properties. Fluids extend time between overhauls.

Premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring.

Specifically engineered for extended drain intervals up to 500,000 miles as set by equipment manufacturers for over-the-road trucks and heavy equipment. Prevents wear and improves equipment life. Excellent "All Season" summer and winter performance. Outperforms all conventional gear oils. Also excellent for passenger cars and trucks. Compatible with most limited-slip differentials.

Premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring.

High quality replacement for applications specifying SAE 80W-90 conventional gear lube. Synthetic construction provides improved cold flow properties, high viscosity index and heat resistance. Contains an over treat of high quality additives, exceeding the minimum standards. Provides excellent wear protection and long equipment life. Performance specifications include: API GL-5 & MT-1, MIL-PRF-2105E, Dana SHAES 234 (Formerly Eaton PS-037) for 250,000 miles, Mack GO-J, plus hypoid gear oil specifications from all foreign and domestic manufacturers such as GM, Ford and Daimler Chrysler. Can also be used in rear axles where API Service GL-4 lubricant is recommended.

Formulated for use with both synthetic and petroleum gear lubricants and safely replaces manufacturer recommended friction modifiers. Its convenient flip-top dispenser provides quick and easy application to the gear housing. One four-ounce bottle of Slip-Lock treats differential capacities of two to four quarts. It is not for use in automatic transmissions or other applications requiring ATF.

NOTE: AMSOIL Synthetic Gear Lubes do not require the use of this additive. However, not all differentials respond the same and if chatter is noticed, the addition of AMSOIL Slip-Lock will eliminate it. For chattering differentials not running AMSOIL Gear Lube, this product is an excellent solution to the problem.

TRICO Exact Fit wiper blades are pre-assembled
to precisely match the vehicles arm type. They easily install in only seconds.  Exact Fit blades' all-metal construction provides superior strength and durability. These high-quality blades offer better-than-OEM performance and longevity, and cover nearly 99 percent of all auto/light truck applications. TRICO Exact Fit blades also cover many applications in class 6, 7 and 8 heavy-duty trucks. They are available in lengths from 10" to 28".

Look up the Exact Fit TRICO Wiper Blades for your vehicle
(click on Online Product Application Guide)

As the first manufacturer to develop winter wiper blades in 1953, TRICO set the standard for snow country performance. TRICO Winter blades feature a protective rubber boot to help prevent snow and ice from clogging the blade. This allows it to maintain even pressure to provide
a clean wipe and enhance driving visibility. Winter blades have a riveted design for extra durability. Their extra-thick, rugged OEM metal superstructure provides superior strength, and the pre-attached universal adapter fits 95 percent of vehicles directly. TRICO Winter
blades are available in lengths of 11" to 28". No other wiper blade manufacturer offers 17", 19", 21", 26" or 28" lengths.

Look up the Winter TRICO Wiper Blades for your vehicle (click on Online Product Application Guide)

NeoForm wiper blades are TRICO's highest-performing blades. Their single beam construction offers an infinite number of blade pressure points that deliver a constant,
even pressure across the entire length of the
wiper for a smoother, more consistent wipe. NeoForm blade's attractive European aerofoil design helps keep the blade on the windshield,
even in high wind or vehicle speeds. They fit most popular vehicles and come with a blade cleaner cloth packet.

Look up the NeoForm TRICO Wiper Blades for your vehicle (click on Online Product Application Guide)

Airborne contaminants, corrosive pollutants and harsh environmental conditions can all contribute to the premature aging of a car's paint. Regular washing and waxing can easily make the difference between a long lasting, luminous glow, or a dull, dumpy finish. Proper vehicle maintenance involves cleaning paint and keeping it clean, which is a much smarter choice, in the long run, than trying to repair distressed, damaged paint. Mothers® offers a unique and wide product line that includes everything needed to clean, polish and care for vehicles.

Simply apply Miracle Wash using the aerosol spray can, work around with a towel and let the surface dry to a haze. Buff with a clean towel until the haze is removed and wipe away to leave your car with a fantastic shine and a super tough protective finish. The active ingredients in the Miracle Wash formula are surfactants. These specialized chemicals not only lift the dirt off of the surface of your car, they also hold them in suspension while you wipe the surface clean. Throughout the process, Miracle Wash acts as a protective barrier between the dirt particles and the surface, protecting the finish from abrasion. But Miracle Wash does more than just clean. Its specialized antistatic agents repel dust and light dirt, maintaining your car's brilliant shine long after you've finished washing it. And Miracle Wash even protects against the damaging effects of the sun's ultraviolet rays.