Specially formulated for four-stroke recreational motors, including ATVs, outboard motors and motorcycles. It may also be used in cars and trucks. Its broad viscosity range makes it excellent for use in both hot and cold temperature extremes.

An exclusive formulation, lubricates and protects high performance two-cycle motors, both on and off the track. High performance motors, particularly those that are modified, operate hotter and at higher RPMs than recreational motors, and they need good oil for peak performance. DOMINATOR is engineered for racing. It has the right film strength and clean burning properties for "on the edge" operation.

A precise synthetic formulation that exceeds the lubrication demands of modern two-cycle motors. Today's two-cycle outboard motors operate at higher temperatures and at leaner oil and fuel ratios than older motors. This difficult operating environment requires proper lubrication technology to keep motors running long and strong. HP Injector is a premium lubricant engineered with AMSOIL synthetic base oils and MAXDOSE advanced additives. It contains up to 30 percent more additives than other TC-W3 two-cycle oils for "super clean" operation. And because AMSOIL synthetic oils are more durable, they are perfect for lean mixture operations.

Formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication.The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil is a specially developed molecularly saturated synthetic base oil. This, combined with a potent additive package, ensures exceptional lubricity, cleanliness and optimum clean-burning characteristics. Extensive research and testing, including a full snowmobiling season in severe Rocky Mountain applications, has proven that wear on cylinders, pistons and bearings is dramatically reduced.

Specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is smokeless and delivers as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1.

AMSOIL Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oils are formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oils have excellent lubricity and cleanliness properties, controlling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.

Made with a full metal base plate for superior strength at the double seal & also feature a silicone anti-drainback valve. Glass-enhanced media in WIX oil filters offers greater efficiency, capturing more 10 to 12 micron sized particles than other cellulose/synthetic blend medias.

Reduces friction and wear in high-speed, high-temperature components like bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #0 is preferred for cold temperature and automatic pump systems.

Reduces friction and wear in high-speed, high-temperature components like wheel bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #1 grease has better mobility and is preferred for cold temperature and automatic pump systems.

AMSOIL GL Series multi-purpose, EP greases are qualified against the highest grease standards*, NLGI GC (wheel bearing) and LB (chassis), and are designed for multiple use applications. These greases are composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GL Greases are compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

AMSOIL Synthetic Water Resistant Lithium Complex Grease is an extreme-pressure multi-purpose grease formulated specially for wet-duty performance. Its water washout and spray off resistance ideally suit it for use in the wheel bearings of vehicles and trailers frequently exposed to water, mud, snow or ice. The grease is also excellent for use in plants, such as paper mills, in which machinery undergoes frequent or prolonged exposure to water.

AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.

A heavy duty spray lubricant fortified with special rust and corrosion inhibitors. Penetrates and adheres to metal surfaces, leaving a long lasting protective coating. Apply MPHD to any metal surface that requires a heavy duty lubricant or is exposed to the damaging effects of salt, moisture or chemical corrosion. Works as an undercoat, leaving a wax-like film. Recommended for motorcycle and bicycle chains. Won't "sling" off. Dry to the touch. Doesn't attract dust. It is ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating car doors, wheel wells, rocker panels, seams and other metal surfaces exposed to water, dirt or road salt.

Premium fuel additive formulated to thoroughly clean and restore peak performance in small engine and powersports equipment fuel systems.

Perfect for use on surfaces which may be damaged by conventional lubricants such as grease or oil. Protects with a dry lubricating film. Helps prevent the cracking and drying of rubber. Displaces water and makes an excellent mold release lubricant. May be used where light duty or silicone lubricants are recommended.

A synthetic, greaseless all-purpose lubricant that provides metal surfaces with a long-lasting film. It forms no gum or sludge. Its penetrating agents cut through rust and corrosion to allow free movement of hardware parts. Dries electrical and ignition systems, and protects all electrical equipment from moisture, including salt water. Effective in applications as diverse as hardware, household appliances, sporting goods and electrical equipment. No silicone or harmful chemicals.

Premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring.

Specifically engineered for extended drain intervals up to 500,000 miles as set by equipment manufacturers for over-the-road trucks and heavy equipment. Prevents wear and improves equipment life. Excellent "All Season" summer and winter performance. Outperforms all conventional gear oils. Also excellent for passenger cars and trucks. Compatible with most limited-slip differentials.

Premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring.

High quality replacement for applications specifying SAE 80W-90 conventional gear lube. Synthetic construction provides improved cold flow properties, high viscosity index and heat resistance. Contains an over treat of high quality additives, exceeding the minimum standards. Provides excellent wear protection and long equipment life. Performance specifications include: API GL-5 & MT-1, MIL-PRF-2105E, Dana SHAES 234 (Formerly Eaton PS-037) for 250,000 miles, Mack GO-J, plus hypoid gear oil specifications from all foreign and domestic manufacturers such as GM, Ford and Daimler Chrysler. Can also be used in rear axles where API Service GL-4 lubricant is recommended.

Simply apply Miracle Wash using the aerosol spray can, work around with a towel and let the surface dry to a haze. Buff with a clean towel until the haze is removed and wipe away to leave your car with a fantastic shine and a super tough protective finish. The active ingredients in the Miracle Wash formula are surfactants. These specialized chemicals not only lift the dirt off of the surface of your car, they also hold them in suspension while you wipe the surface clean. Throughout the process, Miracle Wash acts as a protective barrier between the dirt particles and the surface, protecting the finish from abrasion. But Miracle Wash does more than just clean. Its specialized antistatic agents repel dust and light dirt, maintaining your car's brilliant shine long after you've finished washing it. And Miracle Wash even protects against the damaging effects of the sun's ultraviolet rays.