list

Specially formulated for four-stroke recreational motors, including ATVs, outboard motors and motorcycles. It may also be used in cars and trucks. Its broad viscosity range makes it excellent for use in both hot and cold temperature extremes.

More Information

A robust formulation designed for hot temperature, severe service operation of small engines where routine maintenance is often difficult or infrequent. It is formulated with premium synthetic base oils that exceed both 10W-30 multi-grade and SAE 30 straight-grade viscosity requirements. Unlike conventional SAE 30 motor oils, AMSOIL ASE has a naturally high viscosity index and does not contain paraffin (wax). It has a -38°F pour point and qualifies for SAE 10W, making it an “all season,” multigrade lubricant with a wide operating temperature range. As an SAE 30 weight motor oil, AMSOIL ASE provides outstanding protection for hot operating engines.

More Information

Provides superior protection and performance in the most severe automotive driving conditions. AMSOIL High Performance Synthetic 10W-40 Motor Oil provides a wide range of protection in all four-cycle gasoline and diesel engines, including pickups, RVs, cars and off-highway vehicles. It is recommended for use in vehicles subject to stop-and-go driving, short trips, high temperatures, frequent trailer pulling and off-road use.

More Information

AMSOIL Series 3000 Synthetic 5W-30 Heavy-Duty Diesel Oil is a premium quality all fleet lubricant, specifically designed for use in commercial, industrial and fleet applications requiring diesel specifications CF, CF-2, CG-4, and CH-4 and API SH, SJ gasoline engine lubrication requirements. Fuel efficient formula for both gasoline and diesel fleets. Delivers up to 82 percent greater wear protection than other popular diesel oils. Series 3000 resists oil breakdown from heat, blow-by chemicals and oxygen up to ten times longer than conventional oils.

More Information

An exclusive formulation, lubricates and protects high performance two-cycle motors, both on and off the track. High performance motors, particularly those that are modified, operate hotter and at higher RPMs than recreational motors, and they need good oil for peak performance. DOMINATOR is engineered for racing. It has the right film strength and clean burning properties for "on the edge" operation.

More Information

A precise synthetic formulation that exceeds the lubrication demands of modern two-cycle motors. Today's two-cycle outboard motors operate at higher temperatures and at leaner oil and fuel ratios than older motors. This difficult operating environment requires proper lubrication technology to keep motors running long and strong. HP Injector is a premium lubricant engineered with AMSOIL synthetic base oils and MAXDOSE advanced additives. It contains up to 30 percent more additives than other TC-W3 two-cycle oils for "super clean" operation. And because AMSOIL synthetic oils are more durable, they are perfect for lean mixture operations.

More Information

Formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication.The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil is a specially developed molecularly saturated synthetic base oil. This, combined with a potent additive package, ensures exceptional lubricity, cleanliness and optimum clean-burning characteristics. Extensive research and testing, including a full snowmobiling season in severe Rocky Mountain applications, has proven that wear on cylinders, pistons and bearings is dramatically reduced.

More Information

Specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is smokeless and delivers as much as 30 percent fewer emissions at 100:1 mix ratios than oils mixed at 50:1.

More Information

Reduces friction and wear in high-speed, high-temperature components like bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #0 is preferred for cold temperature and automatic pump systems.

More Information

Reduces friction and wear in high-speed, high-temperature components like wheel bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #1 grease has better mobility and is preferred for cold temperature and automatic pump systems.

More Information

Extreme-pressure, moly-fortified. Provides outstanding protection for steering knuckles, spring shackles, heavy equipment pivot joints and other components operating in high-load, low-speed conditions. NLGI #1 is preferred for cold temperatures and auto pumping systems. Offers excellent water washout resistance.

More Information

More Information

AMSOIL GL Series multi-purpose, EP greases are qualified against the highest grease standards*, NLGI GC (wheel bearing) and LB (chassis), and are designed for multiple use applications. These greases are composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GL Greases are compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

More Information

AMSOIL GL Series multipurpose, EP grease is qualified against the highest grease standards*, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple use applications. This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GL Grease is compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

* Applicable only to NLGI Consistency Grades #1 and #2

More Information

Qualified against the highest grease standard, NLGI GC (wheel bearing) and LB (chassis), and are designed for heavy duty applications. These greases are composed of synthetic base oils and lithium-complex thickeners that provide the film strength, shear resistance, and mechanical stability critical to high load protection. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GH Greases are compounded with oxidation and corrosion inhibitors, effective oil soluble EP additives and molybdenum disulfide (moly) solid EP additives for all around protection in severe conditions.

More Information

More Information

More Information

AMSOIL Synthetic Water Resistant Lithium Complex Grease is an extreme-pressure multi-purpose grease formulated specially for wet-duty performance. Its water washout and spray off resistance ideally suit it for use in the wheel bearings of vehicles and trailers frequently exposed to water, mud, snow or ice. The grease is also excellent for use in plants, such as paper mills, in which machinery undergoes frequent or prolonged exposure to water.

More Information

AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.

More Information

Ideal for chainsaws. Its semi-synthetic basestocks reduce drag effectively, which optimizes efficiency and extends chain life. It clings tenaciously to metal surfaces, delivering unparalleled lubrication and protection.

More Information

A heavy duty spray lubricant fortified with special rust and corrosion inhibitors. Penetrates and adheres to metal surfaces, leaving a long lasting protective coating. Apply MPHD to any metal surface that requires a heavy duty lubricant or is exposed to the damaging effects of salt, moisture or chemical corrosion. Works as an undercoat, leaving a wax-like film. Recommended for motorcycle chains. Won't "sling" off. Dry to the touch. Doesn't attract dust. It is ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating car doors, wheel wells, rocker panels, seams and other metal surfaces exposed to water, dirt or road salt.

More Information

AMSOIL Series 2000 Chaincase Oil provides superior protection and performance for enclosed chains.  Ideal for snowmobiles, ATVs and general equipment.  Extreme pressure additives provide extra wear protection.  Extends chain life repels water, and inhibits rust, oxidation and foam.  Superior low temperature starting, performance and protection.

More Information

Premium fuel additive formulated to thoroughly clean and restore peak performance in small engine and powersports equipment fuel systems.

More Information

Perfect for use on surfaces which may be damaged by conventional lubricants such as grease or oil. Protects with a dry lubricating film. Helps prevent the cracking and drying of rubber. Displaces water and makes an excellent mold release lubricant. May be used where light duty or silicone lubricants are recommended.

More Information

A synthetic, greaseless all-purpose lubricant that provides metal surfaces with a long-lasting film. It forms no gum or sludge. Its penetrating agents cut through rust and corrosion to allow free movement of hardware parts. Dries electrical and ignition systems, and protects all electrical equipment from moisture, including salt water. Effective in applications as diverse as hardware, household appliances, sporting goods and electrical equipment. No silicone or harmful chemicals.

More Information

AMSOIL Synthetic Automatic Transmission Fluid exceeds the performance requirements for domestic and foreign automatic transmission fluid applications. AMSOIL ATF provides automatic transmissions, power steering units and hydraulic equipment with excellent lubricating protection and better performance over a wider temperature range than do conventional petroleum fluids. Improves fuel efficiency, reduces transmission temperatures and increases transmission life. Provides unsurpassed thermal stability and up to five times the service life of conventional ATFs. Delivers maximum protection for towing and other severe-duty applications.

More Information

Engineered to eliminate the deficiencies common to all conventional, petroleum ATF's, AMSOIL Torque-Drive® provides superior performance and protection against thermal and oxidative degradation, sludge and varnish formation, viscosity shear down, cold temperature oil thickening, poor friction stability, high component wear and shortened oil life. Automatic transmission operating expenses can be directly linked to transmission fluid quality. Poor quality oils need frequent changes and they reduce the effective service life of transmissions. AMSOIL Torque-Drive® extends lubricant life up to six times* and provides protection beyond that possible from conventional ATF's.

More Information

This product is the modern lubricant for modern farm and industrial equipment. Engineered specifically to meet the tough applications of heavy-duty, hydraulic-powered operations. Exceeds the performance requirements of virtually every piece of modern machinery. Provides exceptional lubrication to reduce wear, resist heat, protect against rust and extend fluid and equipment service life.

More Information

Formulated for heavy-duty powershift transmissions. Provides outstanding friction performance for enhanced clutch engagement. Prevents slippage and glazing. Shear stable and anti-wear fortified. Resists high-temperature oxidation, varnish & sludge formation. Superb cold-flow properties. Fluids extend time between overhauls.

More Information

Premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring.

More Information

Specifically engineered for extended drain intervals up to 500,000 miles as set by equipment manufacturers for over-the-road trucks and heavy equipment. Prevents wear and improves equipment life. Excellent "All Season" summer and winter performance. Outperforms all conventional gear oils. Also excellent for passenger cars and trucks. Compatible with most limited-slip differentials.

More Information

Premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring.

More Information

High quality replacement for applications specifying SAE 80W-90 conventional gear lube. Synthetic construction provides improved cold flow properties, high viscosity index and heat resistance. Contains an over treat of high quality additives, exceeding the minimum standards. Provides excellent wear protection and long equipment life. Performance specifications include: API GL-5 & MT-1, MIL-PRF-2105E, Dana SHAES 234 (Formerly Eaton PS-037) for 250,000 miles, Mack GO-J, plus hypoid gear oil specifications from all foreign and domestic manufacturers such as GM, Ford and Daimler Chrysler. Can also be used in rear axles where API Service GL-4 lubricant is recommended.

More Information

More Information

Simply apply Miracle Wash using the aerosol spray can, work around with a towel and let the surface dry to a haze. Buff with a clean towel until the haze is removed and wipe away to leave your car with a fantastic shine and a super tough protective finish. The active ingredients in the Miracle Wash formula are surfactants. These specialized chemicals not only lift the dirt off of the surface of your car, they also hold them in suspension while you wipe the surface clean. Throughout the process, Miracle Wash acts as a protective barrier between the dirt particles and the surface, protecting the finish from abrasion. But Miracle Wash does more than just clean. Its specialized antistatic agents repel dust and light dirt, maintaining your car's brilliant shine long after you've finished washing it. And Miracle Wash even protects against the damaging effects of the sun's ultraviolet rays.

More Information