
Synthetic
Fuel Efficient Automatic Transmission Fluid (ATL)
Package sizes include:
1-Quart Bottle
1-Quart Bottles (case of 12)
2.5-Gallon Bottle
2.5-Gallon Bottles (case of 2)
30-Gallon Drum
55-Gallon Drum
Transmission Fluid Evacuation
Service:
Bulletin
From Filter Manufacturers Council (16k PDF)
ATF and Transmission Filter Change Procedures (45k PDF)
AMSOIL Transmission fluid recommendations for Cars and Light Duty Trucks
PRODUCT DESCRIPTION
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid (ATL) is
engineered to exceed the requirements of GM, Ford and Toyota where
low-viscosity oil is required. The highly-specialized properties of
this light-bodied fluid provide outstanding performance without
compromising protection, even in severe operating conditions.
Automatic transmissions have become increasingly complex as vehicle manufacturers strive to improve efficiency while satisfying consumer demands. Smaller, smoother-shifting transmissions with longer fluid life capabilities and heavier load capacities are now standard. Traditional ATFs, however, are unable to meet these extreme requirements, and new fluids have emerged with each new advancement in transmission engineering. AMSOIL, with its original introduction of a synthetic ATF in 1980, remains the leader in transmission fluid quality. AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid is formulated with the highest-quality components to exceed the most stringent industry standards. The quality and performance of AMSOIL Synthetic ATF is guaranteed.
Fully Fortified
• Anti-wear/extreme-pressure agents—Extend gear life
• Durable friction modifiers—Anti-shudder
• Anti-oxidants—Extend fluid life
• Seal conditioners—Reduce leaks
• Detergents and dispersants—Keep clean and control deposits
• Corrosion inhibitors—Control rust
• Anti-foam agents—Improve hydraulic function
EXCEPTIONAL HOT- AND COLD-TEMPERATURE PERFORMANCE
Thermal Stability
– Hot temperatures are no excuse for poor reliability. Naturally
heat-resistant and heavily fortified with anti-oxidants, AMSOIL
Synthetic Fuel Efficient Automatic Transmission Fluid exceeds the most
demanding oxidation requirements. It delivers outstanding protection
against sludge and varnish deposits that clog narrow oil passages and
contribute to clutch glazing. AMSOIL Fuel Efficient ATF protects
hot-running transmissions.
Cold-Temperature Fluidity – Cold, thick automatic transmission fluid lengthens shift times and reduces energy efficiency (fuel economy). AMSOIL Synthetic Fuel Efficient ATF is wax-free and delivers extraordinary cold-flow per formance (<-60°F pour point). It helps improve shifting response and energy efficiency while reducing warm-up times.
OUTSTANDING WEAR PROTECTION
Varying speeds and loads causes torque multiplication and extreme
stress on gears and bearings. To prevent wear damage resulting from
insufficient fluid film, AMSOIL Synthetic Fuel Efficient ATF is
formulated with high film strength (shear stability) and a select
anti-wear/extreme-pressure additive that develops a boundary layer of
protection between metal surfaces. Even though AMSOIL Synthetic Fuel
Efficient Automatic Transmission Fluid is a low-viscosity,
fuel-efficient fluid, it has demonstrated its ability to protect as
well as or better than higher-viscosity fluids in the most severe
industry tests.
FRICTION DURABILITY
Today’s transmissions are smaller and must withstand
higher horsepower and torque while delivering smoother
shifts, all with longer fluid life recommendations.
AMSOIL Synthetic ATF is formulated with friction modifier
additives that deliver outstanding clutch-holding
capacity (static friction), torque-transfer ability (dynamic
friction) and anti-shudder properties (slipping torqueconverter
clutches).
EXTENDS FLUID SERVICE LIFE
Modern transmissions are smaller in design,
yet are called upon to deliver smoother
shifts and longer fluid-life capabilities
in higher-horsepower and higher-torque
conditions. AMSOIL placed great emphasis
on developing a fluid to effectively address
the complex demands related to
friction. AMSOIL Synthetic Fuel Efficient
Automatic Transmission Fluid delivers outstanding
clutch-holding capacity (static
friction), torque transfer ability (dynamic
friction) and anti-shudder properties (slipping
torque-converter clutches).
APPLICATIONS
AMSOIL Synthetic Fuel Efficient Automatic
Transmission Fluid is recommended
for automatic transmissions and other applications
requiring DEXRON® VI, MERCON® LV, SP or Toyota WS.
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid is backward compatible and replaces DEXRON® III fluids in older GM automatic transmissions. (DEXRON® VI specification supersedes the obsolete DEXRON® III in GM vehicles.)
*Not for use with CVT or Ford Type F applications.
EXTENDED FLUID SERVICE LIFE
Most drivers are unaware that transmissions commonly
operate under severe service and require shorter fluid
drain intervals. AMSOIL Synthetic Fuel Efficient Automatic
Transmission Fluid is a long-life fluid capable of extended
service intervals. It provides an extra margin of protection,
especially when fluid change intervals are missed or during
heavy use; even during abuse. Drivers can count on
AMSOIL Fuel Efficient ATF to provide protection beyond
conventional fluids.
| SERVICE LIFE | ||
|
Recommendation for cars and light duty trucks
|
||
| Specification |
Normal Service*
|
Severe Service*
|
| DEXRON® VI |
100,000 miles (160,000 km)
|
50,000 miles (80,000 km)
|
| MERCON® LV, SP |
Follow vehicle manufacturer's recommendations
|
|
| Toyota WS |
100,000 miles (160,000 km)
|
60,000 miles (96,000 km)
|
HEALTH &
SAFETY
This product is not expected to cause health
concerns when used for the intended application
and according to the recommendations in the
Material Safety Data Sheet (MSDS). MSDS's are
available upon request at 715-392-7101 or on
our website. Keep Out of Reach of Children. Don't pollute. Return used oil to collection
centers.
|
TYPICAL TECHNICAL PROPERTIES |
|
|
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid (ATL) |
|
|
6.0 |
|
|
29.8 |
|
|
Viscosity Index (ASTM D-2270) |
153 |
|
Flash
Point °C (°F) (ASTM D-92)
|
226 (439) |
|
Fire
Point °C (°F) (ASTM D-92)
|
244 (471) |
|
Pour Point °C (°F) (ASTM D-97) |
-53 (-63) |
|
0.40 |
|
|
9050 |
|
|
1b |
|